Sea Pandan Leaf Fiber as an Alternative Material for Upper Limb Orthosis
Keywords:
Sea pandan leaf fiber, Fiberglass, Upper limb orthosisAbstract
Background: The use of natural materials as an alternative to reduce the use of chemicals. One of the steps is the utilization of natural fibers from sea pandan leaves as a substitute for fiberglass chemicals in the process of making assistive devices for upper limb deformities. Objective: The objective of this scientific work is to utilize synthetic fiber alternatives used in the production of upper limb orthoses. Method: The data collection method used by the researcher is by tracing primary data: observing the composite results of sea pandan leaf fibers. Results: The experimental results show that fibers from sea pandan leaves soaked in a solution of 6 grams of NaOH and 3000 ml of water for one hour, then dried for 24 hours, can be used as a reinforcing material. By using 342.72 ml of resin and 6.8 ml of catalyst, these sea pandan fibers can optimally absorb the resin, thereby forming a sturdy composite structure through the thermal hardening process. The final product produced is a Wrist-Hand Orthosis (WHO) designed to address cases of Carpal Tunnel Syndrome (CTS). This orthosis demonstrates good shape and rigidity, although it is not as strong as fiberglass. The main advantage of sea pandanus fiber is its environmentally friendly properties and natural origin. Conclusion: Sea pandan leaf fibers are a promising alternative to replace fiberglass in WHO production in CTS cases. The process of soaking the fibers in NaOH solution has been proven to enhance resin absorption and strengthen the material's strength. The research results show that this natural fiber has the ability to provide good strength and stiffness, while remaining an environmentally friendly option and supporting the sustainable use of local natural resources.Downloads
References
Alfarisi, C., Nurfatihayati, N., Drastinawati, D., Khairat, Akbar, M., & Maharani, C. (2023). Pembuatan Komposit dari Serat Sabut Kelapa dan Resin Polyester sebagai Material untuk Helm. Journal of Bioprocess Chemical and Environmental Engineering Science, 4, 57–64.
Annisa, D., Rianawati, S., Rahayu, M., Raisa, N., & Nandar, S. (2021). Carpal Tunnel Syndrome (Diagnosis And Management). JPHV (Journal of Pain, Vertigo and Headache), 2, 5–7. https://doi.org/10.21776/ub.jphv.2021.002.01.2
Bisono, R. M., Majedi, F., Al, M. S., Aziz, R., & Choirul, A. (2023). Analysis of Tensile and Bending Properties of Epoxy Resin Matrix Composites Using Variations of Pandanus Tectorius Leaf Fibers. International Journal Of Science, Engineering, and Information Technology, 08(01), 6–9.
Chang, M. C., Park, D., & Choo, Y. J. (2023). Effectiveness of Orthosis for Carpal Tunnel Syndrome: A Narrative Review. International Journal of Pain, 14(1), 3–11. https://doi.org/10.56718/ijp.23-007
Firmansyah, H., Purnowidodo, A., & Setyabudi, S. (2018). Pengaruh Mechanical Bonding pada Aluminium dengan Serat Karbon terhadap Kekuatan Tarik Fiber Metal Laminates. Jurnal Rekayasa Mesin, 9, 127–134. https://doi.org/10.21776/ub.jrm.2018.009.02.9
Fu, Y., & Yao, X. (2022). A review on manufacturing defects and their detection of fiber reinforced resin matrix composites. Composites Part C: Open Access, 8(2), 2–7. https://doi.org/10.1016/j.jcomc.2022.100276
Georgiew, F. S., Florek, J., Janowiec, S., & Florek, P. (2022). The use of orthoses in the treatment of carpal tunnel syndrome. A review of the literature from the last 10 years. Reumatologia, 60(6), 408–412. https://doi.org/10.5114/reum.2022.123681
Hartini, D., Pinandhita, L., & Mubarak, P. (2024). The Mechanical Properties of the Sea Pandan Leaves (Pandanus Tectorius) Fiber-Reinforced Epoxy Composite Were Assessed Using Bending Tests (pp. 185–194). https://doi.org/10.2991/978-94-6463-358-0_19
Haryadi, F., Susanti, C., Gunawan, E., & Sinaga, N. (2019). Daun pandanus tectorius park. Potensinya sebagai bahan baku produk serat alami. Jurnal kehutanan papuasia, 1, 121–126. https://doi.org/10.46703/jurnalpapuasia.Vol1.Iss2.38
Haryadi, F., Susanti, C. M. E., Gunawan, E., & Sinaga, N. I. (2015). Daun Pandanus tectorius Park. Potensinya Sebagai Bahan Baku Produk Serat Alami. Jurnal Kehutanan Papuasia, 1(2), 121–126. https://doi.org/10.31544/jtera.v6.i1.2021.101-108
Huntley, D. E., & Shannon, S. A. (2012). Carpal tunnel syndrome: a review of the literature. Dental Hygiene, 62(7), 316-320. https://doi.org/10.7759/cureus.7333
Indrayani, N. L., Sadiana, R., Ekawati, F. D., Handoyo, Y., Maulana, H., & Dayana, D. N. (2024). Experimental study of variations in fiber types and volume fractions of unsaturated polymer resin (UPR) composites on the mechanical and physical properties of the material. BIS Energy and Engineering, 1, V124019–V124019. https://doi.org/10.31603/BISEENG.59
Irham, B. F. (2023). Analisa kekuatan tarik dan bending serat daun pandan laut sebagai bahan alternatif penguat material komposit. 78.
Joshi, A., Patel, K., Mohamed, A., Oak, S., Zhang, M. H., Hsiung, H., Zhang, A., & Patel, U. K. (2022). Carpal Tunnel Syndrome: Pathophysiology and Comprehensive Guidelines for Clinical Evaluation and Treatment. Cureus, 14(7), e27053. https://doi.org/10.7759/cureus.27053
Pranoto, T. S. H. (2022). Fiberglass dalam Dunia Engineering.
Rasyid, G. (2010). Peningkatan Teknik Pengolahan Pandan (Bagian I)?: Pewarnaan Dan Pengeringan. Jurnal Penelitian Hasil Hutan, 28, 66–76. https://doi.org/10.20886/jphh.2010.28.1.66-76
Rohaeni, R. D. (2022). Peningkatan Kualitas Komposit Fiberglass untuk Material Bodi Kendaraan Listrik. 8.5.2017, 2003–2005.
Setyawan, P., Herlina Sari, N., & Putra, D. (2012). Pengaruhorientasi Danfraksi Volume Serat Daun Nanas (Ananas Comosus)Terhadap Kekuatan Tarik Komposit Polyestertak Jenuh(UP). Dinamika Teknik Mesin, 2. https://doi.org/10.29303/d.v2i1.108
Published
How to Cite
Issue
Section
Copyright (c) 2025 Journal of Prosthetics Orthotics and Science Technology (JPOST)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
